HTC Desire 820 Mini repuestos

HTC Desire 820 Mini Repuestos - Technical Characteristics

The HTC Desire 820 Mini comes with some unique technical features that lend themselves to a robust and efficient smartphone experience. Through this guide we will explore these characteristics and provide step-by-step instructions for replacing HTC Desire 820 Mini Repuestos.

Technical Features

• Display: 5.0 inch touchscreen display with a resolution of 720x1280 pixels,
• Processor: 1.2 GHz Quad-Core Qualcom Snapdragon 410,
• Memory: Internal memory of 8GB which can be expanded up to 32GB via a microSD card,
• Cameras: Features an 8 megapixel rear camera and a 5 megapixel front camera for selfies,
• Battery: 2100mAh non-removable battery,
• Operating System: Runs on Android 4.4.

Replacing HTC Desire 820 Mini Repuestos

Replacement of HTC Desire 820 Mini Repuestos involves a few delicate operations. It requires practical skills as well as some specific tools which are not included in the box. Please follow the steps below carefully.

Tools and Requirements

• Screwdriver: You will need a specific screwdriver to open the mobile device,
• Plastic opening tools: To mitigate potential damage to the exterior,
• Replacement parts: Screens, batteries, motherboards, or any other part prescribed,
• Patience: Ensure you take your time to avoid causing unnecessary damage.

Step-by-Step Instructions

Step One: Start by switching off the device to avoid any short circuits during the operation.

Step Two: Remove the back cover using a plastic opening tool. Carefully pry it open, starting from the corners.

Step Three: With the back cover removed, you will see several screws holding the internal parts together. Use your screwdriver to carefully remove them.

Step Four: After removing the screws, you can access the internal parts. Be careful in this step as you do not want to damage the inner parts.

Step Five: Replace the faulty part with the new repuesto. If you are not sure about this step, please consult with a professional.

Step Six: Once the new repuesto is installed, replace the screws and carefully fit the back cover onto the device. Make sure everything fits perfectly just as it was.

Step Seven: Switch on your device and confirm that it is working normally.

Conclusion

And that's it! If you have followed these steps correctly, you should have successfully replaced the HTC Desire 820 Mini Repuestos. Remember, if you are not confident, it's always safer to refer to a professional technician.