HTC One M10 repuestos

HTC One M10 Repuestos- Technical Features

The HTC One M10 repuestos are designed to expertly fit the HTC One M10 device. Below are the primary technical characteristics:

• Screen: 5.2 inch Super LCD5, covered by Gorilla Glass
• Resolution: 1440 x 2560 pixels
• Battery: Non-removable Li-Ion 3000 mAh battery
• Operating System: Android 6.0.1 upgradable to 8.0
• CPU: Quad-core (2x2.15 GHz Kryo & 2x1.6 GHz Kryo)
• Storage: MicroSD-slot up to 1 TB, 32GB internal
• RAM: 4GB
• Camera: 12MP rear, 5MP front

Instructions for HTC One M10 Repuestos Replacement

Please carefully follow the given steps to properly replace HTC One M10 repuestos:

Tools Required:

• Small Phillips screwdriver
• Tweezers
• Pry tool or equivalent
• Heating pad or hairdryer

Procedure:

• Ensure that the phone is powered off and disconnected from any power source before starting.
• Use the heating pad or a hairdryer to gently heat the adhesive holding the back cover in place. Once the adhesive is softened, use the pry tool to gently remove the back cover.
• Remove all screws visible after taking off the cover using the Phillips screwdriver.
• Gently detach the battery connector and remove the faulty battery. Replace it with the new battery and firmly reconnect the battery connector.
• In the case of a screen replacement, disconnect the screen cable before removing the faulty screen. Install the new screen, ensuring to firmly reconnect the screen cable.
• Once the battery or screen has been replaced, reattach the back cover using new adhesive.
• Switch on your device to confirm that the replacement was done successfully.

Please take into note that these replacement instructions might not cover all the specifics. For best results, it is advisable to consult with a mobile phone repair specialist.