HTC One M9 repuestos

Technical characteristics of HTC One M9 repuestos

Display: 5 Inch, Full HD 1080p Screen

Processor: Qualcomm Snapdragon 810, octa-core

Memory: 3GB RAM

Storage: Internal storage of 32GB, microSD support up to 2TB

Camera: 20MP rear camera, UltraPixel front camera

Battery: 2840mAh

Operating System: Android with HTC Sense

Instructions for replacing HTC One M9 repuestos

Tools Needed

• Sim card ejector tool
• Heat gun or hair dryer
• Tweezers
• Small Phillips screwdriver
• Plastic opening tool

Step 1: Turn off the HTC One M9

Make sure to power off the HTC One M9 to prevent any damage.

Step 2: Remove the SIM card and micro SD card

Using the SIM card ejector tool, detach the SIM card tray and the micro SD card tray.

Step 3: Heat the Back Cover

Use the heat gun or a hair dryer to heat around the edges of the back cover to loosen the adhesive.

Step 4: Remove the Back Cover

Insert the plastic opening tool between the back cover and the phone frame. Run the tool along the edges to lift the back cover. Be careful not to damage any internal components.

Step 5: Remove Screws

Remove the fifteen screws using the small Phillips screwdriver.

Step 6: Replace the broken parts

Once internal parts are accessible, use the tweezers to replace the damaged parts with the HTC One M9 repuestos.

Step 7: Reassemble the Phone

Reassemble the smartphone in reverse order of disassembly. Make sure to place the screws back in properly.

Note:

Take caution while performing these steps, each smartphone and its parts are delicate and need careful handling.