HTC One X9 repuestos

HTC One X9 Repuestos Technical Characteristics

The HTC One X9 smartphone is a robust device, but may occasionally require replacement parts to preserve its performance. Here are some of the key replacement parts (repuestos):

• Display: LCD with capacitive touchscreen, 16M colors
• Resolution: 1080 x 1920 pixels, 16:9 ratio (~401 ppi density)
• Chipset: Mediatek MT6795 Helio X10 (28 nm)
• Battery: Non-removable Li-Ion 3000 mAh battery
• Rear Camera: 13 MP, f/2.0, 28mm (wide), AF
• Front Camera: 5 MP, f/2.8

Instructions for Replacing HTC One X9 Repuestos

Tools Required

You will need a heat gun, a small Phillips-head screwdriver, plastic opening tools, tweezers, and a replacement part.

Step 1: Removing the back cover

Heat the edges of the back cover for a minute or two with a hot air gun. Then use a plastic opening tool to gently pry the back cover off the body of the phone.

Step 2: Removing the battery

Remove the screws securing the battery with your Phillips head screwdriver. Then, gently pry up the battery using the plastic opening tool, disconnect the battery connector using tweezers and remove the battery.

Step 3: Replacing the repuesto

Locate the damaged part that needs to be replaced. If its camera, display, or chipset then disconnect the connector of the part using tweezers. Remove the part using the plastic tool.

Step 4: Installing the new repuesto

Place the new part in the same place where you removed the old one. Make sure it is properly connected or screwed in.

Step 5: Reassembling the phone

Connect back the battery, put back the screws and snap the back cover back into place.

Note: Please ensure your phone is powered off and you are working in a static-free environment to avoid any potential damage. This guide is for informational purposes and you undertake any repairs at your own risk.