HTC P3300 repuestos
There is 1 product.Technical Specifications of HTC P3300 Repuestos
The HTC P3300 is one of the company's phones with replaceable parts. Here is a rundown of the technical specifications for some of the common replaceable parts of the HTC P3300.
- Screen: The P3300 has a 2.8 inch LCD TFT touchscreen with a 240 x 320 pixels resolution.
- Battery: This device uses a...
Technical Specifications of HTC P3300 Repuestos
The HTC P3300 is one of the company's phones with replaceable parts. Here is a rundown of the technical specifications for some of the common replaceable parts of the HTC P3300.
- Screen: The P3300 has a 2.8 inch LCD TFT touchscreen with a 240 x 320 pixels resolution.
- Battery: This device uses a rechargeable lithium-ion battery with a capacity of 1250mAh.
- Memory: It has in-built memory of 64MB RAM and 128MB ROM, expandable via mSD card.
- Operating System: The P3300 initially ran on Windows Mobile 5.0 and can be upgraded to Mobile 6.1.
- Camera: It has a 2MP rear camera with a maximum resolution of 1600 x 1200 pixels.
Instructions to replace HTC P3300 Repuestos
Replacing replaceable parts on the HTC P3300 requires care as improper handling may cause damage. Follow the steps detailed below to save on costs and downtime.
Tools Required
- Small Phillips screwdriver
- Plastic opening tools
- New HTC P3300 replacement part
Steps to Replacing Parts
- Power off device: Ensure that the device is powered off before starting the replacement process.
- Remove back cover: Apply some pressure onto the back cover while sliding it down to remove it.
- Remove battery: Lift the battery from the casing and set it aside.
- Remove screws: Using your Phillips screwdriver, remove any visible screws. Keep them in a safe place for later use. Note that some screws might be hidden under labels or rubber plugs.
- Remove front cover: Use your plastic opening tool to gently pry the front cover off. It should pop off without applying too much force.
- Replace component: At this point, you should be able to see the component you wish to replace. Gently detach it and then install the new one.
- Reassemble device: Once the new part is properly placed and secure, simply follow these steps in reverse order to reassemble your device.
Please note: If you are not confident doing this replacement process, it is recommended to visit a professional repair shop. There could be risks of damaging the phone or invalidating your warranty.
Less More
Available