HTC Radar repuestos

HTC Radar Repuestos Technical Specifications

The HTC Radar repuestos are replacement parts for the HTC Radar smartphone, a model known for its unique design and impressive specifications.

• Processor: 1 GHz Scorpion
• Storage: 8GB Internal Storage
• Ram: 512 MB RAM
• Display: 3.8 inches, S-LCD capacitive touchscreen, 480 x 800 pixels
• Camera: 5 MP, Autofocus, LED flash

Guidelines for Replacing the HTC Radar Repuestos

Tools Required

Before starting the replacement process, ensure that you have the right tools available. You need a Phillips #000 Screwdriver, a plastic opening tool, and a hot air gun for screen removal.

Instructions

• Power off Device: Firstly, assure that your HTC Radar is entirely powered off.
• Remove the Back Cover: You'll have to remove the back cover of the device. This can be done by sliding it downwards.
• Remove Battery: Take out the battery of the smartphone carefully.
• Remove Screws: Now it's time to eliminate the six Phillips #000 screws that hold the internal frame of the smartphone.
• Remove Frame: Use a plastic opening tool to pry the internal frame away from the display assembly.
• Disconnect Cables: Next, uncouple the various flex cables attached to the motherboard. These include the display, digitizer, and antenna cables.
• Heat and Remove Screen: Utilize the hot air gun to loosen the adhesive holding the screen to the front panel. Then, use the plastic opening tool to safely remove the screen.
• Replace Spare Parts: Now, you can replace the faulty parts with the new repuestos. Simply install them carefully in the place of the faulty parts.
• Reassemble Device: After replacing, reconstruct your device by following these steps in reverse order. Turn on your device to check if everything is functioning correctly.