HTC Tattoo repuestos

    There is 1 product.

    HTC Tattoo Repuestos – Technical Specifications

    The HTC Tattoo mobile device has multiple parts, or 'repuestos,' which may require replacement in the event of damage or wear-and-tear. Key components include the display screen, battery, motherboard, and more. Here are some fundamental technical specifications of these components.

    • Display S...

    HTC Tattoo Repuestos – Technical Specifications

    The HTC Tattoo mobile device has multiple parts, or 'repuestos,' which may require replacement in the event of damage or wear-and-tear. Key components include the display screen, battery, motherboard, and more. Here are some fundamental technical specifications of these components.

    • Display Screen: TFT resistive touchscreen, 65K colors, 240 x 320 pixels, 2.8 inches (~143 ppi density).
    • Battery: Removable Li-Ion 1100 mAh battery, offering Stand-by Up to 340 h (2G) / Up to 520 h (3G), and Talk time Up to 6 h 30 min (2G) / Up to 5 h 50 min (3G).
    • Motherboard: Equipped with a Qualcomm MSM7225 Snapdragon S1 chip.
    • Memory: MicroSD (dedicated slot), up to 16 GB (uses shared SIM slot), with 512 MB ROM, 256 MB RAM.

    Replacement of HTC Tattoo Repuestos

    Replacing parts of the HTC Tattoo could be a challenging task, but with patience and accuracy, it can be accomplished. Below are the instructions for replacing key parts:

    Replacing the Battery

    • Step 1: Turn off the device and unplug it from any power source.
    • Step 2: Use a small tool or your fingernail to carefully remove the back cover of the device.
    • Step 3: Remove the old battery, disconnecting any visibly connected cable.
    • Step 4: Insert the new battery, making sure to connect any wires that were disconnected.
    • Step 5: Replace the back cover.

    Replacing the Screen

    • Step 1: Turn off the device and disconnect it from any power sources.
    • Step 2: Carefully remove the back cover and the battery.
    • Step 3: Use a precision screwdriver to remove any screws securing the screen to the device.
    • Step 4: Gently remove the old screen, disconnecting any wires with a spudger tool.
    • Step 5: Install the new screen, reconnecting any disconnected cables.
    • Step 6: Carefully reattach the screen with its screws.
    • Step 7: Replace the battery and the back cover of the device.
    • Step 8: Turn on the device to test the functionality of the new screen.

    Always ensure you have the appropriate tools and parts before trying to repair a device. If in doubt, seek professional assistance.

    Less
    More
    Showing 1 - 1 of 1 item