Plug in connector HTC

Technical Characteristics of Conector de Carga HTC

The Conector de Carga HTC, also known as the HTC charging connector, is an essential component of HTC smartphones. It allows for the transfer of power from a charging cable to the phone's battery.

Key Features:

• Universal Charging: Suitable for any HTC smartphone model.
• Micro-USB Port: Uses a micro-USB connection for charging.
• Durability: Built for extended use to withstand regular plugging and unplugging.
• High-Speed Charging: Facilitates high-speed charging if used with compatible charging cable and power source.

Instructions on Replacing Conector de Carga HTC

Required Tools:

• Small Phillips Screwdriver
• Spudger Tool
• Tweezers

Step-by-Step Guide:

Please ensure your device is switched off and unplugged before starting the procedure.

1. Remove the back cover of your HTC device using the spudger tool.
2. Remove the battery from the phone.
3. Use the Phillips screwdriver to remove any screws securing the charging port's connector.
4. Lift or remove any tape covering the connector using tweezers, and carefully unplug the connector from the motherboard.
5. Now you have access to the existing Conector de Carga. Use your spudger tool to lift out the old charging port.
6. Take your new Conector de Carga and position it where the old one used to be, ensuring that it's fully seated in the phone housing.
7. Reconnect the connector cable to the new charging port and the motherboard.
8. Replace any tape, screws, battery, and finally the back cover to reassemble your HTC device.

Now your HTC device should be able to charge properly with the new Conector de Carga HTC.