Huawei Ascend G510 repuestos

Huawei Ascend G510 Technical Characteristics

The Huawei Ascend G510 is a compact smartphone known for its user-friendly interface and efficient performance. Here we overview some of its main technical characteristics:

• Processor: 1.2 GHz dual-core Qualcomm Snapdragon (MSM8225)
• Memory: 512MB RAM
• Screen: 4.5 inch touchscreen, 480 x 854 pixel resolution
• Storage: 4GB internal storage, expandable up to 32GB via microSD
• Camera: 5.0MP rear camera, 0.3MP front camera
• Battery: 1700mAh replaceable battery
• Operating System: Android 4.1 Jelly Bean

Instructions for Replacing Huawei Ascend G510 Repuestos

Preparation

Before starting, ensure you have a clean, well lit workspace and the correct tools to hand. You will need a Phillips #00 screwdriver and a plastic opening tool.

Step 1: Power Off the Device

Turn off the Huawei Ascend G510 to avoid causing any potential short-circuits or damaging internal components.

Step 2: Remove The Back Cover and Battery

• An easy snap on/off design allows for simple removal.
• Locate the small notch at the bottom of the device, then use your fingers or a plastic opening tool to pry open the back cover.
• Once the back cover is removed, lift out the battery from its slot.

Step 3: Unscrew and Remove Internal Cover

There are six screws holding the internal plate in place, unscrew these using your Phillips #00 screwdriver then remove the cover carefully.

Step 4: Disconnect and Replace Components

Internal phoned parts like camera, speaker, motherboard, etc. are now accessible. Gently disconnect the connectors and replace with the new Huawei Ascend G510 repuestos.

Step 5: Assemble the Device

Once the parts are replaced, follow the disassembly steps in reverse order to put your device back together.

Note: These instructions are a general guide. Dissembling your device can void your warranty and may result in permanent damage. If in doubt, it is recommended to seek professional help.