Huawei Ascend G525 repuestos

Huawei Ascend G525 Repuestos Technical Specifications

The Huawei Ascend G525 is a versatile phone with several components that can be replaced or repaired as needed. Below are details of key parts and their technical specs.

• Screen: 4.5 inches, 540 X 960 pixels, IPS LCD
• Battery: Li-Po 1700 mAh, removable
• Main Camera: 5 MP, AF
• RAM: 1GB
• Storage: 4GB expandable up to 32GB with microSD
• Processor: Qualcomm MSM8225Q Snapdragon S4 Play, Quad-core 1.2 GHz Cortex-A5

Replacing the Huawei Ascend G525 Repuestos

Preparation

Before initiating procedure, ensure you have the following necessary tools: SIM card ejector tool, heat gun, screwdriver set, plastic pry tool, and replacement parts for the Ascend G525. Turn off the device and remove the SIM card and MicroSD cards if any.

Opening the Device

Start by gently inserting the pry tool into the gap between the screen and the plastic frame. Work your way around to loosen the frame and lift it off.

Replacing the Battery

The battery is located at the center of the device and can be easily lifted out. To replace, simply place the new battery into the compartment.

Replacing the Screen

If replacing the screen: first disconnect the display cable from the motherboard. Using the heat gun, warm the edges of the screen to loosen the adhesive. Pry the screen off with the plastic tool and replace it with the new one. Make sure to reconnect the display cable.

Replacing the Camera

To replace camera, locate and unscrew the two screws securing the camera module to the motherboard. Carefully lift it out and replace it with the new module.

Reassembly

Once all replacements are done, replace the frame back onto the screen, ensuring it clicks into place. Reinsert your SIM and MicroSD cards, and then turn your device back on.

Please ensure to take all safety measures whilst performing these procedures to prevent any injury or damage to the device.