Huawei Ascend G620S repuestos

Huawei Ascend G620S Specifications

The Huawei Ascend G620s is a smartphone that launched in September 2014. Its features include:

• Screen: 5.0 inches, 720 x 1280 pixels, IPS LCD
• Processor: Quad-core 1.2 GHz Cortex-A53
• Memory: 8GB 1GB RAM
• Camera: 8MP rear, 2MP front
• Battery: Li-Po 2000 mAh, non-removable

How to Replace Huawei Ascend G620S Repuestos

Before starting the replacement process, ensure you have the following tools - a plastic opening tool, a Phillips #00 Screwdriver, a small suction cup, and a new set of repuestos.

Step 1: Power Off The Device

Press and hold the power button located on the right side of the device until the device turns off.

Step 2: Remove the Back Cover

Insert the plastic opening tool into the small notch at the bottom of the device. Gently pry up to unclip the plastic tabs holding the back cover to the phone, then remove the back cover.

Step 3: Remove The Battery

Gently lift the battery out of its recess.

Step 4: Remove The Screws

Use the Phillips #00 Screwdriver to remove the 9 screws attached to the back of the phone. Be careful not to lose the small pieces.

Step 5: Remove Internal Cover

Insert the plastic opening tool into the tiny notch at the bottom of the device and slowly slide it around the edges to release the tabs holding the inner cover. You can then lift off the cover.

Step 6: Replace The Repuestos

Replace the old components with the new repuestos, reassembling in the reverse order you disassembled them. Be sure to screw everything back in tightly and snap the casing back on firmly.

Step 7: Power On The Device

Press and hold the power button until the Huawei logo appears, ensuring the device has successfully been put back together and is functioning.

Please note: proceed at your own risk, as any damage caused during repair is your own responsibility.