Huawei Ascend P2 repuestos

Huawei Ascend P2 Repuestos Technical Characteristics

The Huawei Ascend P2 Repuestos parts are high-quality components specifically designed for the Huawei Ascend P2 smartphone. Each component plays an integral role in the device functionality and performance.

Screen:

The phone features an IPS LCD capacitive touchscreen with a resolution of 720 x 1280 pixels.

Camera:

The Huawei Ascend P2 equips a 13-megapixel rear camera with LED flash and a 1.3-megapixel front camera.

Battery:

This smartphone is backed by a built-in Li-Ion 2420 mAh battery.

Instructions for Replacing Huawei Ascend P2 Repuestos

Changing components on your Huawei Ascend P2 smartphone requires careful attention to detail. Please refer to the following step-by-step guide:

For Screen Replacement:

• Power off your Huawei Ascend P2 and remove the SIM card with a pin tool.
• Use a heat gun to loosen the adhesive securing the screen to the phone body.
• Gently peel the damaged screen with a prying tool.
• Connect the new screen repuesto and reapply adhesive for securing the replacement screen.

For Camera Replacement:

• Power off the smartphone before starting.
• Remove the phone back cover and battery.
• Take out the screws holding the camera module.
• Replace the old camera with the new repuesto and reassemble the device.

For Battery Replacement:

• Turn off the device before operating.
• Remove the back cover to expose the battery compartment.
• Pull out the battery carefully by prying it with a plastic tool.
• Place the new battery in properly oriented;

These steps should help you replace your Huawei Ascend P2 Repuestos. Remember to work slowly and carefully to avoid damaging your device and the replacement parts.