Huawei Ascend P7 repuestos

Huawei Ascend P7 Repuestos Technical Specifications

The Huawei Ascend P7 is a powerful smartphone equipped with various high-performance components. This article details the main technical characteristics of these components, commonly known as 'repuestos'.

Main Features of Huawei Ascend P7 Repuestos

• Processor: Hisilicon Kirin 910T, Quad-core 1.8 GHz Cortex-A9
• Display: 5.0 inches, IPS LCD, 1080 x 1920 pixels
• Camera: 13MP rear, 8MP front
• Memory: 16 GB, 2 GB RAM
• Battery: Non-removable Li-Po 2500 mAh battery

Instructions for Replacing Huawei Ascend P7 Repuestos

Below are the step-by-step instructions on how to replace the components of your Huawei Ascend P7.

What You'll Need

• Ejector tool
• Small Phillips screwdriver
• Plastic opening tools

Steps for Replacement

Before starting, make sure the phone is switched off and disconnected from any power sources.

• Remove the SIM card tray and the Micro SD card tray.
• Remove the two screws at the bottom of the phone next to the charging port.
• Use a plastic opening tool to pry open the back cover.
• Once the back cover is removed, you will see the battery and the motherboard.
• Disconnect the battery connector from the motherboard. Use the small Phillips screwdriver to remove the screws holding the motherboard.
• Remove the motherboard carefully. Now you have access to the camera, display, and other components.
• Choose the component that needs to be replaced, and carefully remove it.
• Replace the old component with the new one.
• Reassemble the phone by following the steps in reverse order.
• Switch on the phone to make sure everything works fine.

Note:

Take extra care while handling the phone parts as they are delicate. If unsure, consider seeking the help of a professional.