Huawei Ascend Y220 repuestos

Huawei Ascend Y220 Repuestos - Technical Characteristics

The Huawei Ascend Y220 is a feature-packed smartphone that necessitates unparalleled technical prowess for its maintenance and replacement tasks. Here, we detail the key technical characteristics of its repuestos (parts).

• Display: The device features a 3.5" TFT capacitive touchscreen with 320 x 480 pixels resolution. Replacement screens should be of the same specifications.
• Battery: The Ascend Y220 uses a removable Li-Ion 1350mAh battery. Equivalent capacity batteries can be used for replacements.
• Camera: Equipped with a 0.3MP back-camera, potential replacements should match these specifications.
• Mainboard: As the primary control center, the mainboard replacement should follow the Ascend Y220’s Mediatek MT6572M chipset and Dual-core 1.0 GHz Cortex-A7 processor specification.

Instructions for Replacing Huawei Ascend Y220 Repuestos

Preparation

Before attempting any repairs, ensure you have a clean, well-lit workspace and the necessary tools, such as a Phillips head screwdriver, plastic opening tools, tweezers, and a spudger. Spare parts should correspond to the specific repuesto.

Battery Replacement

• Power off the device.
• Remove the back cover using the notch at the bottom of the smartphone.
• Take out the battery by lifting it from the case.
• Place the new battery in the same compartment and gently press down to secure it.
• Replace the back cover.

Display (or Screen) Replacement

• After following the steps for the battery replacement, remove the screws holding the plastic frame.
• Using the plastic opening tools, gently detach the frame from the screen.
• Use the spudger to disconnect the display connector from the mainboard.
• Replace with the new display and reconnect it to the mainboard.

Mainboard Replacement

• Disconnect all connectors attached to the mainboard using a spudger.
• Remove the screws securing the mainboard, then gently lift it from the case.
• Position the new mainboard and secure it with the screws.
• Reconnect all the previously disconnected connectors.

NOTE: Always take precautions to avoid electrostatic discharge which could damage electronic components.