Huawei Ascend Y5 II CUN-L01 spare parts

Huawei Ascend Y5 II CUN-L01 Repuestos Specifications

The Huawei Ascend Y5 II CUN-L01 is a smartphone with a unique set of technical characteristics. Here are the integral parts that can be replaced:

• Screen: 5.0 inch IPS LCD, 720 x 1280 pixels, 294 PPI resolution.
• Battery: Li-Po 2200 mAh, removable.
• Front Camera: 2 MP, f/2.4 aperture.
• Rear Camera: 8 MP, f/2.0 aperture, with LED flash and autofocus.
• Charging port: microUSB 2.0.
• Speakers: Yes, includes 3.5mm Jack.

Procedure to replace parts of Huawei Ascend Y5 II CUN-L01

Screen Replacement

Start by taking out the battery and ensure you powered off your device. Using a thin pry tool, slowly separate the screen from the frame. Apply heat to soften the adhesive if required. Once separated, connect the new screen to the device and carefully re-adhere it to the frame.

Battery Replacement

Ensure the device is powered off. Remove the back cover and carefully remove the old battery. Replace it with the new one. Make sure to check the battery connectors are aligned properly before reassembling the back cover.

Camera Replacement

Open the back cover and disconnect the battery. Find the camera connector and carefully detach it. Replace the old camera with the new one and make sure to connect it to the motherboard.

Charging Port Replacement

Turn off the device and open the back cover. Disconnect the battery before proceeding. Locate the charging port on the motherboard and remove it. Install the new charging port and reassemble the device.

Speaker Replacement

First, turn off the phone and remove the back cover. Disconnect and remove the old speaker. Then, install the new speaker in the correct orientation, reconnect it, and reassemble the device.