Huawei Ascend Y511 repuestos

Huawei Ascend Y511 Technical Characteristics

The Huawei Ascend Y511 is a low-budget smartphone released in October 2013. Offering users an affordable device with decent qualitites.

Key Specifications:

• Display: 4.5 inches IPS LCD, Resolution 480 x 854 pixels
• CPU: Mediatek MT6572 (28 nm), Dual-core 1.3 GHz Cortex-A7
• RAM: 512 MB
• Storage: 4GB, expandable via MicroSD up to 32 GB
• Battery: Non-removable Li-Po 1730 mAh battery
• Operating System: Android 4.2 (Jelly Bean)
• Camera: 3.15 MP rear camera, VGA front camera

Replacing Huawei Ascend Y511 Repuestos: Step-by-step Guide

Note: Before you start, ensure that you have the necessary replacement parts ("repuestos") and tools ready. Always remember to turn off your device before beginning any repair process.

Step 1: Removing the Back Cover

• Power off the device first, then remove the SIM card(s) along with the memory card.
• Locate the small notch on the bottom edge. Use a plastic opening tool or your fingernail to pry it open.

Step 2: Removing the Battery

• Once the back cover is removed, the battery will be somewhat visible.
• Use the small gap on the lower part of the battery slot to lift the battery out.

Step 3: Replacing the Part

• The part you need to replace may vary (display, buttons, speakers, etc.). Identify the part and unscrew it if needed, then replace it with the new part.
• Make sure the replacement part is properly connected or affixed to the phone.

Step 4: Reassembly

• Put the battery back in the battery slot, making sure it's securely seated.
• Snap the back cover back into place. Ensure that there are no gaps and it fits tightly onto the device.

Now, you can switch on your Huawei Ascend Y511 and check if the replaced part is functioning as expected.