Huawei Honor 10 spare parts

Huawei Honor 10 Repuestos - Technical Characteristics

The Huawei Honor 10 is designed with replacement parts or repuestos, as they are also known in the tech world, that can be easily replaced for common maintenance or repairs. Below, we will take a look at some of these key parts.

Display

The smartphone boasts a Full HD+ display of 5.84 inches with a resolution of 1080 x 2280 pixels. The display uses LCD technology, providing bright and crisp visuals.

Battery

The Huawei Honor 10 features a 3400mAh non-removable battery, providing excellent battery life.

Chipset

The horsepower of the Honor 10 is a HiSilicon Kirin 970 chipset paired with 4GB or 6GB of RAM.

Storage

The Honor 10 offers expansive storage space, with options of 64GB or 128GB, which can be increased using a microSD card.

Camera

The device is outfitted with a dual 16MP + 24MP rear camera set-up and a 24MP front camera for capturing sharp photos and selfies.

Replacements Instructions for Huawei Honor 10 Repuestos

Before you start, remember to power off your Honor 10 and remove the SIM card tray. Note that smartphone repairs require special tools like a SIM card eject tool, a plastic opening tool, Phillips #00 screwdriver, tweezers, and a spundger.

Screen Replacement

To replace the Honor 10's screen, follow these steps:

• Begin by heating the edges of the screen to loosen the adhesive securing it to the phone’s body.
• Prise the screen free using a plastic opening tool, lifting it from the top end and moving downwards.
• Unscrew the connecting screws and carefully disconnect the display's connector.
• Connect the new screen and screw it in place, then lower it back onto the phone’s body, making sure the adhesive sticks correctly.

Battery Replacement

Replacing the battery involves the following steps:

• Start by removing the back cover using a heated prising tool.
• Unscrew the screws holding the battery cover in place, and carefully lift the cover off.
• Disconnect the battery connector and use the spudger to loosen the battery from its adhesive backing.
• Place your replacement battery in, make sure it sticks correctly to the adhesive, then reconnect the battery connector and replace the cover.

Chipset and Memory Replacement

Replacing the chipset or memory is a bit trickier, as it requires working with the motherboard. Proceed as follows:

• Start by removing the back cover and the battery as described above.
• Remove all the screws holding the motherboard in place.
• Carefully lift the motherboard, and you'll see the chipset beneath.
• Carefully remove and replace the chipset or memory, and then carefully replace everything.

Remember, while individual repairs vary in difficulty, having the right tools and following instructions carefully make the task achievable. Always take your time and if you are unsure about anything, seek the advice of a professional. Mistakes may void your warranty or result in permanent damage to your device.