Huawei Honor 8c spare parts

Huawei Honor 8c Repuestos Technical Specifications

The Huawei Honor 8c is an Android-based smartphone that is equipped with various components. It comes with a 6.26 inch display, an octa-core Qualcomm Snapdragon 632 (14 nm) chip, two RAM options (3GB/4GB), as well as a 32GB/64GB storage option, which is expandable via microSD, up to 256GB.

Main Components and Spare Parts

• LCD Screen: This is used to display content in a clear and crisp manner.
• Battery: A 4000mAh capacity battery powers the device.
• Camera: The rear camera is a dual 13MP + 2MP camera, while the front camera is 8MP.
• Motherboard: This houses all the smartphone's primary electronics, which include the processor, memory, and other integral components.
• Speaker: For the emission of sound.
• Cover: Multiple options, from the back cover to frame housings avail.

Replacing Huawei Honor 8c Repuestos

Tools Needed

• Screwdriver
• Plastic Opening Tools
• Spudger
• Tweezers

Steps to Replace Huawei Honor 8c Repuestos

Please follow these steps carefully to replace the parts in your Huawei Honor 8c smartphone. Always ensure to power off your phone before starting the replacement process.

• Begin by removing the SIM card tray from the side of the phone.
• Heat-up the edges of the rear cover gently to melt the adhesive. Do not overheat as it can damage the interior components.
• Use the plastic opening tools to pop open and remove the rear cover. Be careful not to damage the clips attaching the cover to the phone's body.
• Next, unscrew all visible screws using your screwdriver. This will enable you to lift the protective metal shield covering the internal components.
• With the spudger, unplug the battery connector from the motherboard, and gently lift the battery out of its compartment. Remember to not use excessive force.
• Continue the same process to detach other desired parts like the camera, speaker, and the LCD section, assuming they require replacement.
• Replace the old parts with new components.
• Once replaced, reconnect all the components, screw back in the shield and click the cover back.
• Switch on your device to check the newly replaced components.

Please note: If you are unsure or uncomfortable with the replacement process, we highly recommend looking for professional assistance to avoid damage to your device and voiding the warranty.