Huawei Honor 8x Max spare parts

Huawei Honor 8x Max repuestos Technical Characteristics

The Huawei Honor 8x Max repuestos encompasses numerous components that are integral to the functionality of your device. Here are its technical characteristics:

• Screen: 7.12-inch (1080x2244 pixels) IPS LCD capacitive touchscreen
• Processor: Octa-core Qualcomm SDM636 Snapdragon 636
• Cameras: Rear 16MP+2MP and 8MP Front Camera
• Battery: Non-removable Li-Po 5000 mAh battery
• Operating System: Android 8.1 (Oreo), upgradable to Android 9.0 (Pie), EMUI 9.1

Instructions to Replace Huawei Honor 8x Max repuestos

The replacement of different parts in Huawei Honor 8x Max requires patience and precision. Follow these steps carefully:

Tools needed

• Eject Pin
• Screwdriver
• Tweezers
• Pry Opening Tool
• Hairdryer or Heat Gun

Step-by-step Guide

Step 1: Power off your Honor 8x Max and remove the SIM card tray with the eject pin.

Step 2: Remove the case. This may require a hairdryer or heat gun to warm up the adhesive. Use the pry opening tool to pry it up gently.

Step 3: once the case is removed, you will see multiple screws. Use the screwdriver to remove them.

Step 4: Once all screws are out, remove the protective cover to expose the motherboard. You can use tweezers if necessary.

Step 5: Carefully disconnect the battery connector from the motherboard, and then unplug the screen cable.

Step 6: Now you can replace the desired part (screen, battery, camera, etc.). Simply reverse these steps to reassemble the device.

This is a general guide, and specific steps may vary depending on the Huawei Honor 8x Max repuestos that is being replaced.

Please ensure that you handle your device and its components with care throughout this process.

Note: If you feel uncomfortable performing any of these steps, it’s best to consult with a professional technician.