Huawei Honor 9X repuestos

Huawei Honor 9X Repuestos Technical Specifications

The Huawei Honor 9X Repuestos include a variety of parts that offer notable technical benefits. The following list details the parts followed by their technical specifications.

• Display: 6.5 inches Full HD+ display, a resolution of 1080 x 2340 pixels.
• Processor: HiSilicon Kirin 810, Octa-core (2x2.27 GHz Cortex-A76 & 6x1.88 GHz Cortex-A55).
• Memory: Internal - 64GB 4GB RAM, 128GB 4GB RAM, 128GB 6GB RAM and externally upgradable via microSDXC.
• Camera: Main - 48 MP, f/1.8, (wide), 1/2.0", 0.8µm, PDAF 2 MP, f/2.4, (depth) and Selfie - 16 MP, f/2.2, 24mm (wide), 1/3.1", 1.0µm
• Battery: Non-removable Li-Po 4000 mAh battery.

Instructions on Replacing Huawei Honor 9X Repuestos

Please follow these instructions carefully to replace Huawei Honor 9X repuestos. Make sure you have all the necessary tools and repuestos before starting the process.

1. Switch off the Huawei Honor 9X

Ensure the device is powered off. This prevents any unintentional damage to electronic parts or potential risk of electric shock.

2. Remove the back cover

Use a pry opening tool or a suction handle to carefully lift the back cover from the base of the phone.

3. Remove the Battery

Remove all screws securing the battery to the housing. Disconnect the battery connector from the motherboard. Then, remove the battery using plastic opening tools.

4. Remove the damaged components

Depending on what part you intend to replace, follow the specific guidelines for that particular component. For instance, if you're replacing the camera, disconnect the camera connector and remove the camera module.

5. Install the new components

Now, replace the old component with the new repuesto. Make sure the new component is compatible with the Huawei Honor 9X. If you have replaced the camera, remember to remove the lens cover if there's one on your new component.

6. Reassemble the phone

After replacing the necessary repuesto, retrace your steps to reassemble the phone. Connect the battery, fasten the screws and place the back cover.

Note

Please note that these instructions are a general guide and might not apply to all Huawei Honor 9X models. Certain steps may vary based on the specific model and part in question.