Huawei Honor Holly repuestos

Huawei Honor Holly Technical Characteristics

The Huawei Honor Holly presents a strong performance in its class with the following specifications:

• Screen: 5.0 inches, 720 x 1280 pixels, IPS LCD capacitive touchscreen.
• Chipset: Mediatek MT6582 (28 nm)
• Processor: Quad-core 1.3 GHz Cortex-A7
• Memory: 16GB 1GB RAM/li>
• Camera: Back - 8 MP, Front - 2 MP
• Battery: Li-Ion 2000 mAh, removable

Replacing Huawei Honor Holly Parts

Tools Needed

• Screwdriver
• Pry tool
• Plastic opening tools
• Tweezers

Instructions

NOTE: Ensure that the device is powered off and that you are cautious during the disassembly process to avoid causing additional damage.

1. Remove the back cover using the pry tool.

2. Once the cover is removed, the battery will be visible. Remove the battery with the help of the plastic opening tools.

3. Upon removal of the battery, you will see the interior of the phone. Take out the screws that can be seen around the edges with the screwdriver.

4. Use the pry tool again to carefully lift the motherboard cover.

5. With the motherboard exposed, disconnect the flex cables. Make sure to remember which cable goes where.

6. Now you can replace the damaged part. It could be the screen, camera, or other parts.

7. To reassemble, follow the steps in reverse order. Be careful when reconnecting the flex cables to the correct places.

Remember, if at any point you feel uncomfortable performing these steps, it is recommended to take the device to a professional technician.