Huawei Honor Play spare parts

Huawei Honor Play Repuestos: Technical Characteristics

The Huawei Honor Play Repuestos comprises several important components that contribute to the overall performance and efficiency of the phone. They include:

• Display: LCD capacitive touchscreen, 16M colors,1080 x 2340 pixels.
• Chipset: Hisilicon Kirin 970
• RAM: 4GB/6GB
• Storage: 64GB, expandable up to 256GB via microSD
• Battery: Non-removable Li-Po 3750 mAh battery
• Camera: Dual Rear Camera - 16MP and 2MP, Front Camera - 16MP

Huawei Honor Play Repuestos: Replacement Guide

Tools Required

• Screwdrivers
• Tweezers
• Prying tool
• Heating pad

Step-by-Step Guide

Disclaimer: Please ensure that you are well versed with phone repairs before carrying out these steps. If unsure, contact a professional.

Here is a step-by-step guide to help you replace the Huawei Honor Play Repuestos:

1. Switch off the Huawei Honor Play and remove the SIM card tray.
2. Heat the edges of the back cover with a heating pad to loosen the adhesive. Use the prying tool to slowly lift the back cover, starting from the bottom.
3. Once the back cover is removed, unscrew the screws securing the motherboard and battery connector.
4. Disconnect the battery connector, followed by the LCD and digitizer connector. Carefully remove the motherboard.
5. Remove the battery carefully using the prying tool.
6. For screen replacement, separate the LCD and digitizer using a heating pad and prying tool.
7. For camera replacement, unscrew and carefully lift the camera module from the motherboard.
8. For the charging port replacement, unscrew and remove the speaker module to access the charging port.
9. After replacing the necessary repuestos, assemble the parts in reverse order. Make sure all connectors are properly attached and all screws are tightly secured.

Please note that this is a general guide and may not apply to all Huawei Honor Play models. Always check with the device's manual or manufacturer's website for model-specific instructions.