Huawei Honor X6A spare parts

Huawei Honor X6A Repuestos Technical Characteristics

The Huawei Honor X6A repuestos or spare parts encompass various components crucial to the functionality and optimal performance of the device. Ensure to buy only original parts from reputable suppliers to guarantee the longevity of your device. In this guide, we would be talking about some primary Huawei Honor X6A repuestos.

Battery

The battery of the Huawei Honor X6A has a capacity of 3000mAh, giving your smartphone the power to last the whole day under normal usage. It is non-removable and is lithium-ion based.

Display Screen

The Huawei Honor X6A features a capacitive touchscreen with 16M colors, measuring 5.0 inches. It has a resolution of 720 x 1280 pixels that translates to a pixel density of 294ppi.

Camera

The smartphone houses a 13MP rear camera with LED flash, making it possible to take clear pictures even in low light conditions. The front-facing camera is a respectable 5MP, ideal for selfies and video chat.

Instructions for Replacing Huawei Honor X6A Repuestos:

General Tools Required:

• Plastic pry tool
• Small Phillips screwdriver
• Tweezers
• Hot air gun or hair dryer (for screen replacement)

Disclaimer:

Repair and replacement activities can void your device warranty. Proceed at your own risk. Also, make sure the device is powered off before starting.

Replacing the Battery:

Remember, the battery is non-removable, hence it should only be replaced by a professional repair service. Trying it yourself risks damaging the device and is generally not advised.

Replacing the Screen:

1.) To replace the screen, use a hot air gun or hair dryer to soften the adhesive holding the screen to the phone body. Carefully pry the old screen using a plastic pry tool.

2.) Once the old screen is removed, clean the area removing any residual adhesive. Place the new screen into the space, ensuring it fits well and is secure.

Replacing the Camera:

1.) Remove the back cover of the phone using a plastic pry tool.

2.) Locate the camera module and gently disconnect it from the motherboard.

3.) Replace the old camera module with the new one, making sure to reconnect any wires or connections.

4.) Replace the back cover, ensuring it clips neatly into place.

Always remember to conduct a test after each replacement to ensure the new component is working as expected.