Huawei Mate 20 Lite spare parts

    There are 58 products.

    Huawei Mate 20 Lite Technical Characteristics

    The Huawei Mate 20 Lite repuestos boasts an impressive set of technical specifications including:

    • Screen: LTPS IPS LCD capacitive touchscreen, 16M colors
    • Size: 6.3 inches, 97.4 cm2 (~81.7% screen-to-body ratio)
    • Resolution: 1080 x 2340 pixels, 19.5:9 ratio (~409 ppi density)
    • OS: And...

    Huawei Mate 20 Lite Technical Characteristics

    The Huawei Mate 20 Lite repuestos boasts an impressive set of technical specifications including:

    • Screen: LTPS IPS LCD capacitive touchscreen, 16M colors
    • Size: 6.3 inches, 97.4 cm2 (~81.7% screen-to-body ratio)
    • Resolution: 1080 x 2340 pixels, 19.5:9 ratio (~409 ppi density)
    • OS: Android 8.1 (Oreo), upgradable to Android 9.0 (Pie), EMUI 9.1
    • Chipset: Kirin 710 (12 nm)
    • RAM: 4GB / 6GB
    • Storage: 64GB / 128GB, expandable via microSD up to 256GB
    • Camera: 20 Megapixels + 2 Megapixels with LED Flash and auto-focus
    • Battery: Non-removable Li-Ion 3750 mAh battery

    How to Replace Huawei Mate 20 Lite Repuestos

    Tools Needed:

    • Screwdriver
    • Plastic Pry Tool
    • Eject Pin

    Steps

    Follow these steps to replace the parts of your Huawei Mate 20 Lite:

    • Preparing the Phone

      Before doing anything, make sure to power off the device. This prevents any short circuits.

      Remove the SIM card tray with the Eject Pin.

    • Removing the Back Cover

      Use the Plastic Pry Tool to work your way around the phone and disconnect the back cover.

      Watch out for the fingerprint sensor cable connected to the back cover. Disconnect this before completely removing the back cover.

    • Removing Internal Components

      Using the screwdriver, remove all the screws you see. This gives you access to the internal components.

      Disconnect the battery first. This prevents any power from reaching other components while you're working.

      Next, remove the board containing the charger port. Disconnect all the ribbon cables connected to it.

      Remove the motherboard with caution.

    • Replacing the Repuestos

      Substitute the old repuestos with the new one.

    • Reassembling the Phone

      Follow the steps in reverse to reassemble the phone. Be sure to reconnect all cables and replace all screws.

    • Testing

      Test the device to ensure that all components are functioning correctly.

    Note: When troubleshooting your Huawei Mate 20 Lite, you should only proceed if you are confident in your ability to repair electronics. If you're not, send your phone to a professional repairman or the manufacturer.

    Less
    More
    Showing 31 - 58 of 58 items