Huawei Mate 20 X spare parts

    There are 30 products.

    Technical Characteristics of Huawei Mate 20 X Repuestos

    The Huawei Mate 20 X repuestos component set includes various parts designed specifically for the Huawei Mate 20 X smartphone. This includes:

    • Display: Size of 7.2 inches, AMOLED display with 1080 x 2244 pixel resolution.
    • Processor: Kirin 980 SoC with Neural Processing Unit (NPU).
    • Battery: ...

    Technical Characteristics of Huawei Mate 20 X Repuestos

    The Huawei Mate 20 X repuestos component set includes various parts designed specifically for the Huawei Mate 20 X smartphone. This includes:

    • Display: Size of 7.2 inches, AMOLED display with 1080 x 2244 pixel resolution.
    • Processor: Kirin 980 SoC with Neural Processing Unit (NPU).
    • Battery: 5000mAh non-removable battery.
    • Memory: 6GB RAM and up to 256GB internal storage.

    Step-by-step Instructions to Replace Huawei Mate 20 X Repuestos

    Preparation

    Before starting, ensure that you have the correct Huawei Mate 20 X repuestos on hand. You will also need a set of smartphone repair tools, which should include a precision screwdriver set, plastic opening tools, tweezers, and a suction cup.

    Step 1: Power off the phone

    Turn the Huawei Mate 20 X completely off to prevent any short circuits during the repair process.

    Step 2: Remove the SIM Tray

    Use a SIM card removal tool to take out the SIM card tray from the device.

    Step 3: Remove the back cover

    Use a heat gun to warm the edges of the device and loosen the adhesive. Use a suction cup and the plastic opening tools to pry up and remove the back cover.

    Step 4: Disconnect the battery

    Use the precision screwdriver to remove the screws securing the battery connector. Then use a plastic tool to disconnect the battery connector from the motherboard.

    Step 5: Replace faulty components

    This step will vary depending on which components you're replacing. Generally, you'll need to disconnect the old component, remove any screws holding it in place, and then remove it from the device. You can then insert the new component, securing it with the screws if necessary, and reconnect it.

    Step 6: Reassemble the Phone

    Once all necessary components have been replaced, you can reconnect the battery and re-secure the back cover. Make sure all screws are in place, and then reinsert the SIM tray.

    Please remember, if you don't feel confident to perform these steps, take your device to a professional technician.

    Less
    More
    Showing 1 - 30 of 30 items