Huawei Mate 50 Pro spare parts

Huawei Mate 50 Pro Repuestos Technical Characteristics

The Huawei Mate 50 Pro Repuestos is one of the components of one of the flagship phone models from Huawei. This part is intricately designed with high-tech specifications to offer the user the best performance.

Display screen

The Huawei Mate 50 Pro comes with a crystal clear Display screen of 6.76 inches with 1344 x 2772 pixels resolution.

Memory

The device is designed with an internal memory capacity ranging from 128GB 8GB RAM, 256GB 8GB RAM, to 512GB 8GB RAM.

Battery

It is powered by an Li-Po 4400 mAh, non-removable battery.

Chipset

The Mate 50 Pro operates on Huawei Kirin 9000 5G (5 nm) Chipset.

Instructions On How To Replace Huawei Mate 50 Pro Repuestos

Replacing Huawei Mate 50 Pro Repuestos calls for a meticulous approach given the complexity and delicacy of the phone parts. Follow these instructions to replace your phone's components.

Tools Required

• Screwdrivers
• Plastic pry tool
• Heat gun or blow dryer

Procedure

Follow the steps outlined below for a successful replacement.

1. Start by powering off the device to avoid short circuits.
2. Remove the SIM tray.
3. Loosen the phone's pentalobe screws located on the bottom edge of the phone using a screwdriver.
4. Heat the edges of the device using a heat gun or blow dryer. This will help loosen the adhesive holding the back cover in place.
5. Next, use a plastic pry tool to carefully lift and remove the back cover.
6. With the back cover removed, remove all the screws attaching the motherboard to the phone.
7. Carefully lift the motherboard and disconnect any cable connectors attached to it.
8. Once the old Huawei Mate 50 Pro Repuestos are removed, replace it with the new ones and reverse the process to reassemble your device.

Note: This should be done in an area free from dust or water to prevent any secondary damage to the phone.