Huawei Mate 8 spare parts

    There are 39 products.

    Huawei Mate 8 Repuestos: Technical Characteristics

    A Huawei Mate 8 device comes loaded with various components that one may need to replace over time. Here are the technical aspects of some of the commonly replaced parts:

    • Display: The handset features a 6.0-inch Full HD display with a resolution of 1080 x 1920 pixels.
    • Battery: A non-removable L...

    Huawei Mate 8 Repuestos: Technical Characteristics

    A Huawei Mate 8 device comes loaded with various components that one may need to replace over time. Here are the technical aspects of some of the commonly replaced parts:

    • Display: The handset features a 6.0-inch Full HD display with a resolution of 1080 x 1920 pixels.
    • Battery: A non-removable Li-Po 4000 mAh battery powers the Huawei Mate 8.
    • Camera: The smartphone comes with a 16MP rear camera and an 8MP front-facing camera for selfies.
    • Processor and RAM: The device runs on a HiSilicon Kirin 950 Quad-core processor and comes with an option of 3GB or 4GB RAM.

    Instructions for Replacing Huawei Mate 8 Repuestos

    Before getting started, ensure you have all the necessary tools. These include a SIM ejector tool, small Phillips screwdriver, plastic opening tools, tweezers, and spudger.

    Replacing The Display

    • Power off the device and remove the SIM card tray.
    • Use a heat gun to heat the edges of the display. Use the plastic opening tool to gradually lift the display, applying more heat if necessary.
    • Once the display is removed, remove the connector cables and replace it with the new display. Ensure the new display is securely connected before reassembling the device.

    Replacing The Battery

    • Remove the back cover of the phone by unscrewing the screws located at the bottom of the device.
    • Locate the battery connection and disconnect it. Gently remove the battery from the casing.
    • Place the new battery in the case and reconnect the battery connector. Screw back the device and confirm that it powers up successfully.

    Replacing The Camera

    • Remove the back cover and battery following the above instructions.
    • Locate the camera connector and gently disconnect it. Remove the old camera and replace it with a new one. Ensure it is securely fastened.
    • Reconnect the battery, screw back the device and test the new camera.

    Note: This is a simplified version of the actual process, it may require professional assistance for successful replacement.

    Less
    More
    Showing 31 - 39 of 39 items