Huawei Mate 9 Lite repuestos

Huawei Mate 9 Lite Repuestos Technical Characteristics

The Huawei Mate 9 Lite repuestos are key components that contribute to the optimal functioning of the phone. Here are the main technical characteristics of some important repuestos:

• Screen: 5.5 inch, 1080 x 1920 pixels, IPS LCD
• Battery: 3340mAh, Li-Po
• Rear Camera: Dual 12 MP + 2 MP
• Front Camera: 8MP
• Processor: Octa-core Kirin 655
• RAM: 3GB / 4GB
• Storage: 32GB / 64GB, expandable up to 256GB

Instructions for Replacing Huawei Mate 9 Lite Repuestos

Prepare Your Tools

You will need a precision screwdriver, a heat gun, plastic opening tools, tweezers, and replacement parts. Make sure the replacement parts are compatible with the Huawei Mate 9 Lite model.

Disassembling The Phone

Switch off the device. Remove the SIM card tray. Heat the edges of the back cover with the heat gun to soften the adhesive. Then, use a plastic opening tool to gently pry it off.

Removing The Screws

Use the precision screwdriver to remove all visible screws. Keep the screws safe as you will need them for reassembly.

Replacing Specific Parts

• Screen: Lift the screen from the bottom with a thin plastic opening tool. Once the screen is removed, simply place the new screen on the frame, align it well and press firmly to stick.
• Battery: Remove any tape holding the battery and use tweezers to disconnect the battery cable. Replace with the new battery and reconnect the cable.
• Camera: Use a plastic opening tool to disconnect the ribbon cable of the camera that is to be replaced. Gently lift the camera out and install the new one.

Reassembling

Once the desired repuesto has been replaced, reassemble the phone by reversing the process. Make sure to install all screws back in place. Once done, switch on your Huawei Mate 9 Lite to see if the replacement part is functioning properly.

Note: It's always recommended to take your devices to a professional service center if not comfortable with the process.