Huawei Nova 10 Pro spare parts

Huawei Nova 10 Pro Repuestos - Tech Specs and Replacement Guide

The Huawei Nova 10 Pro houses advanced components that make it an incredible device. Knowing the specifications of these components also known as repuestos or replacement parts in Spanish, can be helpful in instances where you might require to replace a part.

Tech Specs

• Display: AMOLED, 1080 x 2340 pixels, 6.5 inches
• Processor: HiSilicon Kirin 990
• RAM: 8GB | 12GB
• Storage: 128GB | 256GB
• Camera: 50MP Main Camera
• Battery: 4500mAh

Replacement Guide

In case of malfunctioning or damage, the key modules such as screen, battery, or camera can be replaced. Here is a general guide:

Tools needed

• Small Phillips Screwdriver: To remove small screws
• Spudger: To gently pry open parts
• Tweezers: To catch small components
• Heat Gun: To soften adhesive

Step-by-step Replacement

Remember to meticulously follow each procedure to avoid further damage:

• Power off the device: To avoid short circuiting, turn off the device first.
• Remove the rear cover: Use the heat gun to soften the adhesive. Once it's warm, gently lift the cover using the spudger.
• Disconnect the battery: Locate the battery connector and use a spudger to disconnect it.
• Replace part: Depending on the repuesto being replaced, locate the piece and carefully remove it. Replace it with the new part.
• Reassemble: After replacing the part, follow the steps in reverse order to reassemble the device.

Note: This is a general guide. In case of any difficulty, it is highly recommended to consult a professional technician.