Huawei Nova 9 SE spare parts

    There are 43 products.

    Huawei Nova 9 SE Repuestos - Technical Specifications and Replacement Guide

    The Huawei Nova 9 SE is a high-performance smartphone with several key components that may require replacement over time. This guide provides detailed specifications and instructions to guide you through the process of replacing these parts.

    Technical Specifications

      ...

    Huawei Nova 9 SE Repuestos - Technical Specifications and Replacement Guide

    The Huawei Nova 9 SE is a high-performance smartphone with several key components that may require replacement over time. This guide provides detailed specifications and instructions to guide you through the process of replacing these parts.

    Technical Specifications

    • Display: 6.67 inches, FHD+ resolution, OLED technology.
    • Processor: Qualcomm SDM7100, Octa-core.
    • Memory: 8 GB RAM, 128 GB of storage.
    • Battery: 4000mAh, Li-Po.
    • Camera: Quad-camera main array (108 MP + 8 MP + 2 MP + 2 MP), 16 MP front-facing camera.

    Replacement Instructions

    Below are the instructions to replace key components of the Huawei Nova 9 SE. Ensure you have the appropriate tools and replacement parts ready before you start.

    Replacing the Screen

    • Step 1: Power off the device and remove the SIM tray.
    • Step 2: Using a heat gun, heat the edges of the screen to loosen the adhesive.
    • Step 3: Gently pry off the screen with a plastic tool to avoid scratching the device.
    • Step 4: Disconnect the old screen's flex cable, and set the old screen aside.
    • Step 5: Connect the new screen's flex cable, and adhere the replacement screen to the device.

    Replacing the Battery

    • Step 1: After removing the screen, locate the battery's connector on the motherboard.
    • Step 2: Using a plastic tool, disconnect the battery connector.
    • Step 3: Remove any screws securing the battery and carefully pry out the battery using the plastic tool.
    • Step 4: Put in the new battery, connect it to the motherboard, and reassemble the device.

    Remember always to take safety precautions like working on a non-conductive surface and wearing ESD-safe gloves when handling electronic components.

    Less
    More
    Showing 1 - 30 of 43 items