Huawei P Smart 2019 spare parts

Technical Characteristics of Huawei P Smart 2019 Repuestos

The Huawei P Smart 2019 repuestos are replacement parts designed to maintain the high functionality and performance of the Huawei P Smart 2019 smartphone.

Main Components:

• Screen: an LCD capacitive touchscreen with a 6.21-inch display and a resolution of 1080 x 2340 pixels.
• Battery: a Li-Po 3400 mAh, non-removable battery.
• Camera: includes a dual primary camera with one 13 MP camera and another 2 MP camera. It also has an 8 MP secondary camera.
• Speakers: an integrated speaker system that delivers quality sound.
• Processor: a Hisilicon Kirin 710 (12 nm) processor, which ensures the phone runs smoothly and effectively

Instructions to Replace Huawei P Smart 2019 Repuestos

Materials:

• Screwdriver
• Plastic opening tools

Steps:

1. Power Off the Device: Before starting, make sure to power off your Huawei P Smart device to avoid any potential damage.

2. Remove the SIM Tray: Using the SIM Tray ejector tool, remove the SIM card tray from the device.

3. Remove the Back Cover: Heat up the edges of the back cover to soften the adhesive. Use a plastic opening tool to carefully pry the back cover open.

4. Disconnect the Battery: Using the screwdriver, remove the screws securing the protective plate over the battery connection. After the plate is removed, disconnect the battery from the motherboard.

5. Replace the Necessary Part: After the battery is disconnected, you will have access to the internals of the device. Identify the part that needs replacing and carefully remove it. Replace it with the new repuesto ensuring all connections are firmly attached.

6. Reassemble the Device: After the new part is in place, reconnect the battery and reassemble the device in the reverse order you disassembled it.

Note:

The process can vary slightly depending on the specific part that is being replaced.