Attention!!!
Please be advised that GLS is experiencing occasional delivery delays due to the Christmas season.
Thank you for your understanding.
The Huawei P Smart 2020 integrates a range of robust, high-quality components. Below we provide detailed technical characteristics of primary hardware repuestos (replacement parts).
The Huawei P Smart 2020 integrates a range of robust, high-quality components. Below we provide detailed technical characteristics of primary hardware repuestos (replacement parts).
Ensure to follow these instructions closely to correctly replace essential components on your Huawei P Smart 2020.
WARNING: This process should be conducted with caution to avoid device damage. If unsure, seek professional assistance.
Start by powering off the phone and removing the SIM card tray.
Heat the edges of the screen gently to soften the adhesive beneath.
Use a suction cup and plastic card to carefully lift the screen, starting at the bottom of the smartphone. Do not pull too hard as there are ribbon cables attached.
Disconnect the screen connector from the motherboard.
Prepare the new screen, ensuring any protective plastic is removed from its surface, and connect it to the motherboard.
Secure the new screen and test functionality before sealing the device.
Follow steps to remove screen.
Unplug battery connector from the motherboard.
Carefully pry battery away from the adhesive that holds it in place.
Ensure all adhesive residue is removed before installing new battery.
Connect new battery to the motherboard.
Check that phone can power on and battery has a solid connection.
Reinstall screen referring to the previous section.
Note: These are general instructions and may slightly differ based on the specific repuesto you are replacing. Always refer to credible online tutorials or professional technicians when unclear.
Less