Huawei P Smart 2020 spare parts

    There are 41 products.

    Huawei P Smart 2020 Repuestos Technical Specifications

    The Huawei P Smart 2020 integrates a range of robust, high-quality components. Below we provide detailed technical characteristics of primary hardware repuestos (replacement parts).

    • Display: LCD capacitive touchscreen, 16M colors, 6.21 inches, 1080 x 2340 pixels resolution.
    • Chipset: Hisili...

    Huawei P Smart 2020 Repuestos Technical Specifications

    The Huawei P Smart 2020 integrates a range of robust, high-quality components. Below we provide detailed technical characteristics of primary hardware repuestos (replacement parts).

    • Display: LCD capacitive touchscreen, 16M colors, 6.21 inches, 1080 x 2340 pixels resolution.
    • Chipset: Hisilicon Kirin 710F (12 nm).
    • Memory: 128GB 4GB RAM, microSDXC (uses shared SIM slot).
    • Battery: Non-removable Li-Po 3400 mAh battery.
    • Camera: Dual main camera (48 MP + 2 MP), single selfie camera 8 MP.

    Instructions to Replace Huawei P Smart 2020 Repuestos

    Ensure to follow these instructions closely to correctly replace essential components on your Huawei P Smart 2020.

    WARNING: This process should be conducted with caution to avoid device damage. If unsure, seek professional assistance.

    Screen Replacement

    • Start by powering off the phone and removing the SIM card tray.

    • Heat the edges of the screen gently to soften the adhesive beneath.

    • Use a suction cup and plastic card to carefully lift the screen, starting at the bottom of the smartphone. Do not pull too hard as there are ribbon cables attached.

    • Disconnect the screen connector from the motherboard.

    • Prepare the new screen, ensuring any protective plastic is removed from its surface, and connect it to the motherboard.

    • Secure the new screen and test functionality before sealing the device.

    Battery Replacement

    • Follow steps to remove screen.

    • Unplug battery connector from the motherboard.

    • Carefully pry battery away from the adhesive that holds it in place.

    • Ensure all adhesive residue is removed before installing new battery.

    • Connect new battery to the motherboard.

    • Check that phone can power on and battery has a solid connection.

    • Reinstall screen referring to the previous section.

    Note: These are general instructions and may slightly differ based on the specific repuesto you are replacing. Always refer to credible online tutorials or professional technicians when unclear.

    Less
    More
    Showing 1 - 30 of 41 items