Huawei P Smart Plus spare parts

Huawei P Smart Plus Repuestos: Technical Specifications

The Huawei P Smart Plus is equipped with several components unique to the device. Here, we'll detail the technical specifications of key repuestos (spare parts).

• Display: 6.3" IPS LCD, 1080 x 2340px resolution
• Battery: Li-Ion 3340 mAh, Non-removable
• Processor: Hisilicon Kirin 710 (12 nm)
• Rear Camera: Dual: 16 MP (f/2.2, PDAF) + 2 MP (depth sensor)
• Front Camera: Dual: 24 MP + 2 MP (depth sensor)
• Internal Storage: 64/128GB expandable via dedicated microSD slot

Replacing Huawei P Smart Plus Repuestos

Disclaimer: Repairing a smartphone requires a steady hand and advanced technical skills. It is highly recommended to seek help from a professional if you're unsure about proceeding.

Instructions for Display Replacement

• Start by turning off the phone to avoid short circuits.
• Use a professional opening tool to gently pry the phone open, starting from the bottom edge.
• Unscrew and remove the screws from the plate protecting the motherboard.
• Detach the screen connector carefully from the motherboard.
• Remove the defective screen and clean the front frame to remove adhesive residue.
• Install the new screen, making sure to reconnect the screen connector.

Instructions for Battery Replacement

• Start with the phone turned off, and gently pry it open.
• Unscrew the plate protecting the battery connector on the motherboard, and carefully detach the connector.
• Use a professional tool to gently pry the battery out of its compartment.
• Install the new battery and reconnect the battery connector. Make sure it fits securely in its compartment.

Instructions for Camera Replacement

• Ensure the phone is turned off before starting.
• Upon opening the phone, locate the camera module connector on the motherboard and detach it carefully.
• Remove the defective camera module and replace it with the new module.
• Reconnect the camera module connector and ensure it's properly attached.

For all replacements, remember to reassemble the phone in the reverse order of how you disassembled it. Ensure that all screws and plates are returned to their original places.