Huawei P Smart Pro 2019 repuestos

Huawei P Smart Pro 2019 Repuestos Technical Specification

The Huawei P Smart Pro 2019 repuestos is a fantastic piece of technology with the following technical specifications:

• Display: Ultra FullView 6.59" Display
• Resolution: 2340 x 1080 pixels
• Camera: Triple AI camera - 48 MP (f/1.8 aperture) + 8 MP (Ultra Wide Angle Lens) + 2 MP (Bokeh Lens)
• Battery: 4000 mAh (Typical Value)

Step-by-step Guide for Replacing Repuestos of Huawei P Smart Pro 2019

Before starting, ensure that you have the replacement parts ready and that your workspace is clean and organized.

Tools Needed

• Small Phillips screwdriver
• Plastic opening tools
• Tweezers

Replacing the Display

Warning: This process can potentially damage your phone if not done accurately. Proceed with caution.

1. Switch off the phone and remove the SIM card tray.
2. Use a heat gun or hair dryer to soften the adhesive that attaches the back cover, then gently pry the cover off with the plastic openings tool.
3. Unscrew the 20 screws securing the metal plate to the phone assembly.
4. Remove the metal sheet and disconnect the battery cable and the screen cable.
5. Replace the screen and reverse the process to reassemble the phone.

Replacing the Battery

Please take note that replacing the battery should be done with utmost care as it is risky.

1. Repeat steps 1-3 from "Replacing the Display" above.
2. Disconnect the connector of the battery and carefully pry the battery from its place.
3. Replace the battery, then carefully reconnect the battery connector. Make sure it is secure.
4. Repeat step 5 from "Replacing the Display" to close up your device.

After following these steps, your Huawei P Smart Pro 2019 should be operating as expected with its new parts.