Huawei P10 Plus spare parts

Huawei P10 Plus Repuestos Technical Characteristics

The Huawei P10 Plus repuestos parts encompass various components that help your device function optimally. Some of the core parts are:

• Display: 5.5-inch QHD display with a 2560 x 1440 resolution.
• Processor: HiSilicon Kirin 960.
• Memory: RAM 4/6GB, internal storage 64/128GB.
• Battery: 3750 mAh capacity.
• Camera: Dual-lens 12 MP + 20 MP on the rear side and an 8 MP lens on the front.

Instructions for Replacing Huawei P10 Plus Repuestos

Preparation

Before proceeding with the replacement, ensure that you have the necessary tools and repuestos ready. This includes a screwdriver, tweezers, a suction cup, a plastic spudger, and your new Huawei P10 Plus repuestos.

Step 1: Power Off the Device

For safety purposes, ensure that the device is off before starting the replacement process.

Step 2: Removing the Back Cover

With the help of a heat gun, loosen the adhesive on the edges of the back cover. Then, use the suction cup to gently lift it away from the phone body.

Step 3: Disconnecting the Battery

Locate the battery connector and gently disconnect it using the plastic spudger.

Step 4: Replacing the Necessary Component(s)

Depending on the repuestos you're replacing, different steps will be necessary. Locate the malfunctioning part(s) and remove it carefully. Replace it with the new component and ensure it's properly in place.

Step 5: Reassembling the Huawei P10 Plus

Once you've replaced all necessary parts, reconnect the battery. Secure the back cover on the phone, ensuring it aligns correctly with the frame. Turn on your device to see if the replaced parts are functioning correctly.

Note: This is a simplified guide; replacing some components might involve additional steps.