Huawei P10 spare parts

Huawei P10 Repuestos Technical Characteristics

Huawei P10 Repuestos are the set of spare parts available for the Huawei P10 smartphone. These parts are designed to replace faulty or damaged components in the device, thereby restoring its functionality.

• Screen: This is the most essential part of the smartphone. The Huawei P10 screen is a 5.1" IPS-NEO LCD.
• Battery: The Huawei P10 comes with a Non-removable Li-Ion 3200 mAh battery.
• Camera: Huawei P10 has two main cameras (Leica optics) and one selfie camera.
• Motherboard: This is the main circuit board that hosts all the other components of the phone.

Replacement Instructions

Tools Needed:

• Screwdriver
• Plastic opening tools
• Heat gun or blow dryer
• Tweezers

Steps to Replace Huawei P10 Repuestos

Step 1: Turn off your Huawei P10 and remove the SIM card tray. Apply heat to the edges of the screen to soften the adhesive.

Step 2: Using plastic opening tools, care should be taken to gently pry open the screen from the rest of the body. If any cables get stuck, don't pull forcefully. Instead take a careful look and disconnect it.

Step 3: Disconnect the battery connector from the motherboard and carefully remove the old battery. Replace it with the new one and reconnect it to the motherboard.

Step 4: If you are replacing the camera, carefully remove the screws holding the camera in place. Detach the flexible cable connected to it and replace it with the new camera. Reconnect the cable and replace the screws.

Step 5: Once all parts are replaced and connected, you may then attach the screen back to the rest of the phone. Ensure the screen is well aligned with the body of the phone before pressing it into place. Turn on your Huawei P10 to test the new components.

NOTE: Always remember to be patient and gentle throughout the entire process. If you find any part of the process to be difficult, consider seeking professional help.