Huawei P20 Pro spare parts

Huawei P20 Pro Repuestos: Technical Characteristics

The Huawei P20 Pro parts, also known as Repuestos, are parts that are designed for replacing components of the Huawei P20 Pro smartphone. Here are their common technical characteristics:

• Display: 6.1 inches, 1080 x 2240 pixels, OLED
• Battery: Li-Po 4000 mAh, non-removable
• Rear Camera: Triple Lens - 40MP (f/1.8, wide) + 20MP (f/1.6, ultra wide) + 8MP (f/2.4, telephoto)
• Front Camera: 24MP, f/2.0, wide
• Processor: Hisilicon Kirin 970 Octa-core
• RAM: 6GB or 8GB
• Storage: 128GB or 256GB, expandable via Nano Memory

Instructions to Replace Huawei P20 Pro Repuestos

Below you will find the general steps to replace parts on a Huawei P20 Pro:

Tools You Need

• Plastic pry tool
• Tweezers
• Screwdriver (Phillips #000)
• Spudger
• Suction cup

Steps to Replace the Repuestos

Always remember, any repair process begins with switching off the device and removing the SIM card tray

1. First, heat the edges of the phone to soften the adhesive. This can be done with a heat gun or a heating pad.
2. Apply the suction cup on the back cover, then insert the plastic pry tool in the small gap generated, slowly sliding it around the phone to remove the back cover.
3. Next, using a Phillips #000 screwdriver, remove the screws that secure the internal parts.
4. Carefully pry up the plastic shroud with the plastic pry tool and remove it.
5. Disconnect the battery and other connectors that connect various parts like the screen, cameras, or tapped parts.
6. Replace the needed Repuesto carefully, connecting it where the old part was originally.
7. Once all swaps are made, reconnect the connectors and put back the internal plastic cover with the screws.
8. Reattach the back cover, applying a bit of heat for better adhesion.

Please be advised, any manipulation of the device is carried out at the owner's risk.