Huawei P30 Lite spare parts

Huawei P30 Lite Repuestos Technical Characteristics

The Huawei P30 Lite repuestos are replacement parts designed to fit perfectly with the Huawei P30 Lite device. Each part is intended to rejuvenate a specific component of the phone, allowing for increased lifespan and improved performance. Here are their primary technical characteristics:

• Screen Specification: 6.15-inch LTPS IPS LCD, 1080 x 2312 pixels, 24-bit color depth
• Battery Specification: Non-removable Li-Po 3340 mAh battery
• Main Camera: Replacement for the 48 MP, f/1.8, (wide), Triple camera
• Selfie Camera: Replacement for the 24 MP, f/2.0, (wide)
• Sim Card Tray: Space for dual Nano-SIM or one Nano SIM and one microSD

How to Replace Huawei P30 Lite Repuestos

Here are detailed instructions on how to replace various parts in the Huawei P30 Lite:

Screen Replacement

Ensure your device is powered down before you start. Follow these steps for a successful screen replacement:

• Remove the SIM card tray.
• Apply heat on the edges of the screen to loosen the adhesive.
• Use a prying tool to gently lift the screen. Be careful not to damage any internal components.
• Disconnect the screen connector from the motherboard.
• Attach the new screen and connect it to the motherboard.
• Reapply the adhesive around the edges and press down to secure the new screen in place.
• Replace the SIM card tray.

Battery Replacement

Once again, ensure your device is off before you begin. Follow these steps to replace the battery:

• Apply heat to loosen the adhesive holding the back cover.
• Use a prying tool to remove the back cover carefully.
• Unscrew and remove the protective plate over the battery connector.
• Disconnect the battery connector from the motherboard.
• Gently pry and lift the old battery out of its compartment
• Place the new battery into the battery compartment and connect it to the motherboard.
• Reattach the protective plate and screw it back in place.
• Reapply adhesive and press the back cover back into place.

Note: Make sure to perform each step with patience and precision to avoid potential damage to the device.