Huawei P30 spare parts

Huawei P30 Repuestos Technical Characteristics

The Huawei P30 is a reliable smartphone with a solid design. Understanding its technical characteristics helps achieve a successful repair.

• Display: 6.1 inch OLED with a resolution of 2340 x 1080 pixels.
• Processor: HUAWEI Kirin 980 Octa-core Processor.
• Memory: 6GB RAM and 128GB internal storage.
• Battery: 3650mAh (typical value).
• Rear Camera: Leica Triple Camera: 40 MP (Wide Angle Lens), 16 MP (Ultra Wide Angle Lens) and 8 MP (Telephoto).
• Front Camera: 32 MP, f/2.0 aperture.

Instructions for Huawei P30 Repuestos Replacement

Tools Required

• Screwdrivers
• Plastic Pry Tool
• Spudger

Battery Replacement

Follow these steps carefully to replace a Huawei P30 battery:

• Switch off: Before proceeding, make sure to turn off your Huawei P30. This is to prevent any short-circuit.
• Remove the Back Cover: Use a heat gun or hair dryer around the edges to loosen the adhesive. Next, use the plastic pry tool to gently lift the back cover. Remember to go slow to avoid damaging internal components.
• Disconnect the Battery: Locate the battery connector on the motherboard. Use a spudger to disconnect it.
• Remove the Battery: Gently lift it off using the plastic pry tool.
• Install the New Battery: Place the new battery carefully into the phone. Connect it to the motherboard. Ensure it sits correctly.
• Reassemble the Phone: Reconnect any removed parts and secure the back panel.

Camera Replacement

Follow these steps carefully to replace a Huawei P30 camera:

• Switch off: Remember to turn off your Huawei P30 before beginning.
• Remove Back Cover: Similar to the battery replacement, use a heating tool to weaken the adhesive on the edges. Use the pry tool to lift the back cover.
• Remove the Battery: Disconnect and remove the battery as previously described.
• Disconnect the Camera: Remove the respective screws and disconnect the camera connector using the spudger.
• Install the New Camera: Connect the new camera to the connector and secure it with the screws.
• Reassembly: Reinstall the battery and any other removed components. Finally, secure the back cover.

Remember to proceed slowly and carefully with each step to ensure no damage is done to the internal components of your Huawei P30.