Huawei P50 Pro spare parts

Huawei P50 Pro Technical Specifications

The Huawei P50 Pro is a top-tier smartphone from Huawei, full of high-quality components. Below are some of its primary technical characteristics:

• Display: 6.6 inches OLED, 1B colors, HDR10, 120 Hz
• Processor: Kirin 9000 4G/ Qualcomm SM8350 Snapdragon 888 4G (5 nm)
• Battery: Li-Po 4360 mAh, non-removable (Quick charge 66W)
• Camera: Quad camera setup (50 MP, 64 MP, 13 MP, 40 MP)
• Operating System: HarmonyOS 2.0

Instructions on Replacing Huawei P50 Pro Repuestos (Components)

The following instructions detail how to dismantle your Huawei P50 Pro for replacing components:

Disclaimer

Replacing the components of your smartphone should ideally be done by a certified professional. Any damage caused by improper handling is not covered by the warranty. Proceed at your own risk.

Tools Needed

• Small Phillips screwdriver
• Plastic pry tool
• Sim Card Ejector
• Tweezers

Steps to Replace Huawei P50 Pro Repuestos

Step 1 – Turn off the Device

Ensure that the mobile phone is switched off before starting the procedure.

Step 2 – Remove the SIM Tray

Use the Sim Card Ejector tool to remove the SIM card tray from the side of the device.

Step 3 – Remove the Back Cover

Use the plastic pry tool to gently loosen and remove the back cover of the device.

Step 4 – Unscrew the Shielding Bracket

Using the Phillips screwdriver, unscrew and remove the protective shielding bracket that covers the internal components.

Step 5 – Disconnect the Battery

Use the tweezers to disconnect the battery connector from the motherboard.

Step 6 – Replace the Repuesto

Depending on the component that needs replacement, the process from here will vary. Once replaced, follow the previous steps in reverse order to reassemble your device.