Huawei P9 Lite spare parts

Huawei P9 Lite Repuestos - Technical Specifications

Huawei P9 Lite is a sleek and stylish smartphone that packs a powerful performance. Here are its outstanding features:

• Screen: 5.2 inch IPS LCD, Full HD (1080 x 1920 pixels), 424 PPI
• Processor: HiSilicon Kirin 650, Quad-core Cortex-A53
• RAM: 2GB/3GB
• Internal Storage: 16GB, expandable via microSD up to 256GB
• Battery: Non-removable 3000mAh battery
• Rear Camera: 13MP, f/2.0 aperture, autofocus, LED flash
• Front Camera: 8MP, f/2.0
• Operating System: Android 6.0 (Marshmallow), upgradable to 7.0 (Nougat)

Instructions for Replacing Huawei P9 Lite Repuestos

Preparation

Before you start, ensure you have the necessary tools including a screwdriver, plastic opening tools, tweezers, and a new part for replacements.

Step 1: Power off Your Phone

Start by powering off your Huawei P9 Lite to avoid short-circuiting the device while disassembling.

Step 2: Remove the Back Cover

Use the plastic opening tool to pry open the back cover starting from the bottom edge near the charging port. Be gentle to avoid damaging the phone.

Step 3: Remove the Battery

Remove the battery connector from the motherboard using the tweezers. After that, use the plastic opening tool to pry out the battery.

Step 4: Remove the Desired Component

Whether it's the camera, speaker, or motherboard that requires replacement, loosen the screws holding it in place. After that, gently lift and remove the faulty component.

Step 5: Install the New Component

Place the new component where the faulty one was removed. Screw it into place and ensure it's secure.

Step 6: Reassemble the Phone

Reconnect the battery to the motherboard and place the back cover in its original position. Press down the edges until it fits snuggly.

This should leave your Huawei P9 Lite in perfect working condition. If you encounter any issues, consider seeking professional assistance.