Huawei Y5P spare parts

Huawei Y5P Specifications

The Huawei Y5P is a robust and reliable smartphone renowned for its performance. Here are its primary technical specifications:

• Display: 5.45 inches IPS LCD
• Resolution: 720 x 1440 pixels
• Front Camera: 5MP
• Rear Camera: 8MP
• Battery Capacity: 3020 mAh
• Operating System: Android 10, EMUI 10.1
• Storage: 32GB
• Processor: Mediatek MT6762R Helio P22 (12 nm)
• RAM: 2GB

Replacing Huawei Y5P Spare Parts

Before you start this procedure, make sure that you have all the necessary tools at your disposal. It's always a good idea to work on a clean, flat surface, ideally a place where you can keep track of your phone's screws and parts.

Step 1: Turn off the device

Always start by turning off the device to avoid any short circuit while you are working on it.

Step 2: Remove the back cover

Use a prying tool to slowly and carefully remove the back cover from the main body of the phone. Start from one corner and work your way around the device.

Step 3: Unscrew the securing brackets

There are several screws holding the securing brackets in place. Use a specific screwdriver to remove them.

Step 4: Disconnect and replace the malfunctioning part

You can now access the internal components of the device. Disconnect the connectors from the motherboard. Remember the position of each connector. Replace the malfunctioning part and reconnect the connectors to the motherboard.

Step 5: Reassemble the device

Reinstall the screws back on the securing brackets. Press the back cover onto the device, making sure it snaps into place. Power on your phone to test the replaced components.

Note: The above steps can differ based on the part being replaced. The procedure for screen, battery, and camera replacement can be different.