Huawei Y6 2019 Y6 Prime 2019 spare parts

Huawei Y6 2019 Y6 Prime 2019 Repuestos - Technical Characteristics

The Huawei Y6 2019 and Y6 Prime 2019 models feature the following specifications:

• Display: 6.09" Display, HD+ 720 x 1560 Pixels
• Battery: Non-removable Li-Ion 3020 mAh battery
• Rear Camera: 13 MP f/1.8
• Front Camera: 8 MP f/2.0
• Processor: MediaTek Helio A22
• RAM + Storage: 2GB RAM + 32GB Storage
• Operating System: EMUI 9.0 (Based on Android 9)

Instructions for replacing Huawei Y6 2019 Y6 Prime 2019 Repuestos

Before you start, ensure you have a replacement part for your Huawei smartphone alongside the necessary tools - a star-shaped screwdriver, a plastic opening tool, and an eject pin. Note that this should be done with utmost care to avoid damage.

Step 1: Power off your Phone

Press and hold the power button until the Power Off option appears then tap it. Wait for the phone to shut down completely.

Step 2: Remove the Sim Card Tray

Use the eject pin to remove the sim card tray.

Step 3: Unscrew the Phone

Use the star-shaped screwdriver to unscrew the two screws at the bottom of the phone.

Step 4: Open the Phone

Insert the plastic opening tool at the bottom of the phone then slide it around the edges to open up the phone. Be careful not to damage any internal components.

Step 5: Disconnect and Replace the Component

Depending on the replacement part you have:

• For Battery: Disconnect the battery connector then carefully lift the battery out of the phone. Insert the new battery and connect it to the motherboard.
• For Camera: Disconnect the camera connector then lift the camera module out. Insert the new camera and connect it to the motherboard.

Step 6: Reassemble the Phone

Once replaced, reassemble the phone by following these steps in reverse order. Start by putting the back cover and screwing in the screws then insert the sim card tray.

Note:

If you feel uncomfortable with this process, it's recommended to take your phone to a professional.