Huawei Y9 Prime 2019 repuestos

Huawei Y9 Prime 2019 Repuestos Technical Characteristics

The Huawei Y9 Prime 2019 repuestos include several key parts that make up the total functionality of the device. These components are crafted with high-quality materials to ensure durability and efficient performance. Below are some of the key replacements parts:

• Screen Display: LCD capacitive touchscreen, 16M colors
• Battery: Non-removable Li-Ion 4000 mAh battery
• Camera: 16-megapixel main camera sensor and a pop-up selfie camera. Replacement parts are available.
• Charging Port: USB Type C
• Motherboard: HiSilicon Kirin 710F
• RAM: 4GB

Instructions on How to Replace Huawei Y9 Prime 2019 Repuestos

Replacing the Screen Display

Before you start, ensure that you have the correct replacement part and necessary tools such as a heat gun, plastic pry tool and a screwdriver set.

• Step 1: Power off your Huawei Y9 Prime 2019.
• Step 2: Use a heat gun to slightly warm up the edges of the screen. This is to loosen the adhesive attaching the screen to the phone body.
• Step 3: Carefully use the plastic pry tool to separate the screen from the phone body.
• Step 4: Once the screen is off, disconnect it from the motherboard.
• Step 5: Connect the new screen to the motherboard, and attach it to the phone body. Ensure it fits correctly before applying adhesive.
• Step 6: Finally, power on your phone to test the new screen.

Replacing the Battery

As with the screen replacement, ensure you have the necessary tools and new battery ready.

• Step 1: Power off your Huawei Y9 Prime 2019.
• Step 2: Open the phone case and locate the battery.
• Step 3: Carefully disconnect the battery from the motherboard.
• Step 4: Replace the old battery with the new one and secure it properly.
• Step 5: Close the phone case and power on the device to test the new battery.

Please note that this tutorial does not substitute for professional technical help and may void warranty if incorrectly done. It is advisable to consult an expert if you are unsure.