Innjoo Halo 3 Plus spare parts

Innjoo Halo 3 Plus Repuestos: Technical Specifications

The Innjoo Halo 3 Plus repuestos is a robust and reliable device with impressive technical specifications:

• Screen size: 5.5-inch
• Resolution: 720X1280 pixels
• Processor: MediaTek quad-core
• RAM: 2GB
• Storage: 16GB, expandable up to 128GB via microSD
• Camera: 13MP rear, 8MP front
• Battery: 3600mAh
• OS: Android 7.0 Nougat

Instructions on replacing Innjoo Halo 3 Plus Repuestos

Step 1: Power off the Device

Before you begin with the replacement process, it is absolutely essential to switch off the device to prevent any type of short-circuit during the process.

Step 2: Get the Tools Ready

For the replacement process, you will need a screwdriver, plastic opening tools, tweezers, and a suction cup. Make sure you have them all well prepared before you proceed.

Step 3: Remove the Outer Case

Use the plastic opening tools to pry open the case. Be gentle to prevent any damage to the case or internal components.

Step 4: Detach the Battery Connector

Disconnect the battery connector using tweezers carefully. Make sure you keep the tweezers away from any other part of the circuit board to prevent accidental short circuits or damage.

Step 5: Replace the Faulty Component

Identify the faulty component and replace it with the new one. Make sure the replacement component is properly installed.

Step 6: Reassemble the Device

Once you have successfully replaced the faulty components, reassemble the device in reverse order of disassembly.

Caution: Always remember to follow all safety operational instructions while performing any repairs to avoid any injury or further damage to the device.