Innjoo One 4G spare parts

Innjoo One 4G Repuestos Technical Characteristics

The Innjoo One 4G Repuestos encompasses a range of components critical to the functioning of the Innjoo One 4G mobile. This is a breakdown of their specifications:

• Screen: IPS LCD capacitive touchscreen, 16 Million colors, 720 x 1280 pixels, 5.0 inches (~294 ppi density).
• Processor: Octa-core 1.4 GHz Cortex-A7
• Camera: 13 MP, f/2.2, AF rear camera and 5 MP, f/2.4 front camera
• Battery: Non-removable Li-Po 2600 mAh battery
• Memory: Internal Storage of 16GB with option to expand via MicroSD
• Connectivity: Supports 4G, Wi-Fi 802.11 b/g/n, Bluetooth, GPS

Instructions for Replacing Innjoo One 4G Repuestos

Preparation

• Ensure you have the correct replacement parts for the Innjoo One 4G and basic smartphone repair tools, including a SIM card ejector tool, spudger, small Philips head screwdriver, and plastic pry tools.
• It's recommended to fully power off the device before beginning any repair process

Step 1: Removing the Back Cover

Insert the SIM card ejector tool into the small hole located on the edge of the phone's casing to remove the SIM card tray. Carefully use a plastic pry tool around the edges of the back cover to detach it from the phone's body.

Step 2: Disconnecting the Battery

Once the back cover is removed, you can disconnect the battery. Use a spudger or pry tool to carefully lift the connector keeping the battery in place.

Step 3: Replacing The Required Component

The procedure will differ depending on the component you wish to replace. Always ensure you are careful not to damage the small connectors that attach to different components of the phone.

Step 4: Reassembling the Phone

Once the necessary replacements are made, reassemble the phone by reattaching the battery connector and catch. Return the back cover to its original position and secure it in place.

Switch on your device to ensure the replaced parts are functioning as expected.