Innjoo Pro 2 spare parts

Innjoo Pro 2 Repuestos Technical Characteristics

The repair and replacement components for the Innjoo Pro 2 smartphone come with unique features and should be handled with care. Here are the technical characteristics:

• Screen: The display is a 5.5 inch Full HD screen with a resolution of 1920 x 1080 px.
• Battery: The Innjoo Pro 2 uses a non-removable Li-Poly 4000 mAh battery.
• Camera: It has a primary camera of 16MP and a secondary camera of 8MP.
• Parts: Parts include motherboard, battery, camera, front and back cover, buttons, and other internal parts.
• Materials: The phone parts are mostly made of aluminium, glass and high-quality plastic.

Innjoo Pro 2 Repuestos Replacement Instructions

Follow these instructions carefully when replacing parts of the Innjoo Pro 2 smartphone:

Step 1: Power Off the Phone

Ensure the phone is switched off to prevent damage to internal components.

Step 2: Remove the Back Cover

Use a pry tool to cautiously remove the back cover. Begin from the bottom edges and work your way up.

Step 3: Disconnect the Battery

Locate the battery connector and carefully detach it. Ensure to avoid any pressure on the motherboard.

Step 4: Remove the Required Parts

• Camera: Unfasten the screws securing the camera then unplug the connector.
• Battery: If the battery requires replacement, ensure you have disconnected it from the motherboard. Gently apply upward pressure to remove it.
• Screen: Begin by removing the screws on the sides. Then, use a heat gun to loosen the adhesive securing the display. Slowly lift the screen away from the body.

Step 5: Install the New Component

Follow the specific guidelines that come with your repuestos. Always double-check connections before reassembling.

Step 6: Reassembly

Ensure all components are securely fastened before attaching the back cover. Switch on your smartphone and check the functionality of the replaced part.