IPhone 11 Pro spare parts

Technical Characteristics of iPhone 11 Pro Repuestos

The iPhone 11 Pro repuestos or parts are key components that enable the device to function optimally. The following are fundamental elements that make up the iPhone 11 Pro:

• Display: Super Retina XDR OLED, HDR10, 800 nits max brightness
• Resolution: 1125 x 2436 pixels, 19.5:9 ratio (~458 ppi density)
• Processor: Apple A13 Bionic (7 nm+)
• Memory: 64GB, 256GB, 512GB NVMe
• Camera: Triple-lens setup of 12MP (wide, ultrawide, telephoto)
• Battery: Li-Ion 3046 mAh, non-removable

Replacement Instructions of iPhone 11 Pro Repuestos

Please note, replacing any components of iPhone 11 Pro requires experience and caution as these devices are delicate and can be easily damaged. Make sure you have the proper tools before starting.

Display Replacement

Here are some steps to follow:

• Switch off the phone. Remove the screws at the bottom.
• Using a suction cup, pull up the display slightly, insert a pry tool between the display and frame.
• Gently detach the screen from the frame, taking care not to pull too hard as there are ribbons connected.
• Unscrew and remove the brackets covering the ribbon connectors. Disconnect the ribbons carefully.
• Connect the new display to the phone.
• Reassemble the phone following these steps in reverse.

Battery Replacement

Follow these steps:

• Open the phone as per the display replacement steps.
• Disconnect the battery connector using a plastic spudger.
• Remove the adhesive strips holding the battery in place.
• Lift the battery out of the phone. Insert the new battery and reconnect the battery connector.
• Reassemble the phone.

Note: Always dispose of your old battery at an accredited recycling centre.