Repair Parts iPhone 2G

iPhone 2G Repuestos Technical Characteristics

The iPhone 2G typically requires the following repuestos or replacement parts:

• Screen and LCD: The iPhone 2G utilizes a 3.5-inch LCD screen, that has a resolution of 320 x 480 pixels.
• Battery: The device is equipped with a Lithium-ion battery, rated at 1400mAh.
• Home Button: The primary action button, commonly known as the Home Button.
• Speaker: The bottom speaker is responsible for delivering most of the sound.
• Back cover: Back cover houses the battery and internal components.

Instructions for Replacing iPhone 2G Repuestos

Here are the steps to replace iPhone 2G parts:

Tools Required

• Phillips #00 Screwdriver
• Plastic Spudger
• Suction Cup

Disassembly

• Start by removing the two Phillips #00 screws next to the dock connector.
• Attach the Suction Cup to the screen.
• Hold the device in one hand, use the other hand to lift the screen up using the Suction Cup.

Replacement

• Use the plastic Spudger to detach the ribbon cables connecting the screen to the motherboard.
• Remove the faulty part and replace it with the new one.
• Reconnect the ribbon cables properly.
• Reassemble your iPhone by replacing the screen and screwing in the two Phillips #00 screws back into place.

These steps will vary slightly depending on which specific part you are replacing. Always remember to power off your device before doing any kind of repair work.